| Engine Model | Cat C9.3 ACERT™ |
|---|---|
| Flywheel Power | 161.0 kW |
| Operating Weight | 21382.0 kg |
The new D6T dozer makes high efficiency dozing as easy as driving your pickup truck. A smooth-shifting, fully automatic four-speed Cat® transmission continuously optimizes the power train for the application. You save fuel and operator effort, without sacrificing durability, power or productivity. Work smarter too, with a full range of Cat Connect GRADE technology features to fit your job site needs.
| Engine Model | Cat C9.3 ACERT™ Cat C9.3 ACERT™ | More |
| Flywheel Power | 215.0 HP 161.0 kW | More |
| Displacement | 567.0 in³ 9.3 l | More |
| Emissions | U.S. EPA Tier 4 Final U.S. EPA Tier 4 Final | More |
| Net Power - 2,200 rpm - ISO 9249/SAE J1349 | 215.0 HP 161.0 kW | More |
| Net Power - Maximum - ISO 9249/SAE J1349 at 1,200 rpm | 245.0 HP 183.0 kW | More |
| Note (1) | All non road Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD All non road Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD | More |
| Note (2) | Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. | More |
| Build Number | 19 19 | More |
| Fuel Tank | 97.2 gal (US) 368.0 l | More |
| Cooling System | 12.2 gal (US) 46.0 l | More |
| Engine Crankcase | 6.5 gal (US) 24.6 l | More |
| Power Train | 39.1 gal (US) 148.0 l | More |
| Final Drive - Each | 3.6 gal (US) 13.5 l | More |
| Roller Frames - Each | 6.6 gal (US) 25.0 l | More |
| Pivot Shaft Compartment | 1.3 gal (US) 5.0 l | More |
| Hydraulic Tank | 16.5 gal (US) 62.5 l | More |
| DEF Tank | 4.5 gal (US) 17.1 l | More |
| Operating Weight | 47138.0 lb 21382.0 kg | More |
| LGP A | 53829.0 lb 24417.0 kg | More |
| LGP S | 51385.0 lb 23299.0 kg | More |
| XL A | 47846.0 lb 21703.0 kg | More |
| XL SU | 47138.0 lb 21382.0 kg | More |
| XL VPAT | 53042.0 lb 24060.0 kg | More |
| XW A | 49797.0 lb 22588.0 kg | More |
| XW SU | 48909.0 lb 22185.0 kg | More |
| XW VPAT | 54045.0 lb 24515.0 kg | More |
| LGP VPAT | 54526.0 lb 24733.0 kg | More |
| Note | Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator. Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator. | More |
| LGP A-Blade | 6.46 yd³ 4.94 m³ | More |
| LGP S-Blade | 4.96 yd³ 3.79 m³ | More |
| XL A - Blade | 5.17 yd³ 3.95 m³ | More |
| XL SU - Blade | 7.26 yd³ 5.55 m³ | More |
| XL VPAT - Blade | 6.07 yd³ 4.64 m³ | More |
| XW A - Blade | 5.69 yd³ 4.35 m³ | More |
| XW SU - Blade | 7.38 yd³ 5.64 m³ | More |
| XW VPAT - Blade | 6.57 yd³ 5.02 m³ | More |
| LGP VPAT - Blade | 6.57 yd³ 5.02 m³ | More |
| LGP A-Blade | 16.6 ft 5072.0 mm | More |
| LGP S-Blade | 13.3 ft 4063.0 mm | More |
| LGP VPAT - Blade | 13.7 ft 4160.0 mm | More |
| XL A - Blade | 13.7 ft 4160.0 mm | More |
| XL SU - Blade | 10.7 ft 3261.0 mm | More |
| XL VPAT - Blade | 12.7 ft 3880.0 mm | More |
| XW A - Blade | 14.8 ft 4520.0 mm | More |
| XW SU - Blade | 11.7 ft 3562.0 mm | More |
| XW VPAT - Blade | 13.7 ft 4160.0 mm | More |
| Ground Clearance | 16.0 in 406.0 mm | More |
| Ground Pressure (ISO 16754)(3) | 5.11 psi 35.2 kPa | More |
| Length - Basic Tractor(2) | 14.5 ft 4415.0 mm | More |
| Length - Track on Ground | 10.67 ft 3245.0 mm | More |
| Machine Height - To Product Link Antenna(1) | 10.83 ft 3303.0 mm | More |
| Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). | More |
| Note (2) | (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. | More |
| Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. | More |
| Width - Tractor - Without Trunnions - Standard Track | 10.5 ft 3201.0 mm | More |
| Ground Clearance | 16.0 in 406.0 mm | More |
| Ground Pressure (ISO 16754)(3) | 6.28 psi 43.3 kPa | More |
| Length - Basic Tractor(2) | 16.42 ft 5002.0 mm | More |
| Length - Track on Ground | 10.67 ft 3245.0 mm | More |
| Machine Height - To Product Link Antenna(1) | 10.83 ft 3303.0 mm | More |
| Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). | More |
| Note (2) | (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. | More |
| Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. | More |
| Width - Tractor - Without Trunnions - Standard Track | 10.33 ft 3143.0 mm | More |
| Ground Clearance | 15.0 in 375.0 mm | More |
| Ground Pressure (ISO 16754)(3) | 8.66 psi 59.7 kPa | More |
| Length - Basic Tractor(2) | 13.83 ft 4210.0 mm | More |
| Length - Track on Ground | 9.25 ft 2814.0 mm | More |
| Machine Height - To Product Link Antenna(1) | 10.67 ft 3253.0 mm | More |
| Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). | More |
| Note (2) | (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. | More |
| Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. | More |
| Width - Tractor - Without Trunnions - Standard Track | 8.0 ft 2440.0 mm | More |
| Ground Clearance | 15.0 in 375.0 mm | More |
| Ground Pressure (ISO 16754)(3) | 9.78 psi 67.4 kPa | More |
| Length - Basic Tractor(2) | 16.08 ft 4894.0 mm | More |
| Length - Track on Ground | 9.25 ft 2814.0 mm | More |
| Machine Height - To Product Link Antenna(1) | 10.67 ft 3253.0 mm | More |
| Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). | More |
| Note (2) | (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. | More |
| Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. | More |
| Width - Tractor - Without Trunnions - Standard Track | 8.92 ft 2717.0 mm | More |
| Ground Clearance | 15.0 in 375.0 mm | More |
| Ground Pressure (ISO 16754)(3) | 6.64 psi 45.8 kPa | More |
| Length - Basic Tractor(2) | 13.83 ft 4210.0 mm | More |
| Length - Track on Ground | 9.25 ft 2814.0 mm | More |
| Machine Height - To Product Link Antenna(1) | 10.67 ft 3253.0 mm | More |
| Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). | More |
| Note (2) | (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. | More |
| Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. | More |
| Width - Tractor - Without Trunnions - Standard Track | 9.17 ft 2792.0 mm | More |
| Ground Clearance | 16.0 in 406.0 mm | More |
| Ground Pressure (ISO 16754)(3) | 6.92 psi 47.7 kPa | More |
| Length - Basic Tractor(2) | 16.42 ft 5002.0 mm | More |
| Length - Track on Ground | 10.67 ft 3245.0 mm | More |
| Machine Height - To Product Link Antenna(1) | 10.83 ft 3303.0 mm | More |
| Note (1) | (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). | More |
| Note (2) | (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. | More |
| Note (3) | (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. | More |
| Width - Tractor - Without Trunnions - Standard Track | 9.83 ft 2996.0 mm | More |
Name : Cat
Service Tel : （309）578-6298
E-mail :
Web Site : https://www.caterpillar.com/en.html
Address :
Copyright Notice 2002-2024 global-ce.com Construction Machinery Online. All rights reserved.
Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China
