Reliability

• Cat® C13 ACERT™ engine offers increased power density with a combination of proven electronic, fuel and air systems.
• Utilizing rigorous component design and machine validation processes results in unmatched reliability, durability and high uptime.

Durability

• Heavy-duty planetary powershift transmission and axles handle extreme applications.
• Full flow hydraulic filtration system with additional loop filtration improves hydraulic system robustness and component life.

Productivity

• Engine power increased by approximately 5% improves machine performance and response (compared to H Series).
• Lock-up clutch torque converter, combined with lock-to-lock shifting, delivers smooth shifts, fast acceleration and speed on grade.
• Z-bar linkage provides high breakout force at ground level.
• Easy-to-load Performance Series Buckets feature a wider mouth and curved side plates that improve material retention (fill factor) and decrease cycle times.
• Optional limited slip differentials improve performance in the pile and poor underfoot conditions.
• Optional Aggregate Handler configuration offers slightly higher payload capability for loose aggregate rehandling.*

*Optional configurations and equipment may vary from region to region and requires conformance to Caterpillar payload policy. Consult your dealer or Caterpillar representative for details.

Fuel Efficiency

• Up to 10% more fuel efficient than K Series and up to 25% more fuel efficient than H Series loaders.**
• Power dense ACERT engine burns less fuel by providing power and torque when needed.
• Standard productive Economy Mode provides maximum fuel savings with minimal productivity impact.

**Actual results may vary based on factors such as, but not limited to, machine configuration, operator technique, machine application, climate, etc.

Ease of Operation

• Best-in-class operator environment provides unmatched comfort, visibility, and efficiency.
• E-H joystick steering with force feedback for precision control and dramatically decreases operator arm fatigue.
• Intuitive, ergonomic controls and touch screen multifunction display keep operators focused on their work.
• Ride control system with dual accumulators provides excellent ride quality and lowers cab vibrations.

Safety

• Excellent cab access with wide door, remote door opening option and stair-like steps.
• Floor to ceiling windshield, large mirrors with integrated spot mirrors and rear vision camera provide industry leading all-around visibility.

Serviceability

• One-piece tilting hood with side and rear doors; hydraulic and electrical service centers make access fast and easy.
• Safe, ground level access to fuel fill and daily maintenance points means less servicing time is required.
• Optional, fully integrated Cat Autolube system provides full lube system monitoring and diagnostic test visibility.

Cat Connect Technology

• Monitor, manage and enhance job site operations.
• Cat LINK Technologies: VisionLink® enables owners to access data wirelessly to monitor machine health, utilization and location.
• Cat DETECT Technologies: Integrated rear vision camera enhances visibility behind machine to help operators work safely. Optional Cat Rear Object Detection increased operator awareness of the working environment which enhances site safety.
• Cat PAYLOAD Technologies: Optional Cat Production Measurement 2.0 brings simple and accurate on-the-go payload scale allowing operators to deliver exact loads and work more efficiently. Advanced Productivity subscription provides comprehensive actionable information to help you manage and improve the productivity and profitability of your operations.

Overview

The new 980M Wheel Loader, with the 2017 product update, applies proven technologies systematically and strategically to meet your high expectations for reliability, productivity, fuel efficiency, and long service life. Meets U.S. EPA Tier 2/EU Stage II equivalent or Tier 3/Stage IIIA equivalent emission standards, depending on emission standards of specific country.

Net Power - ISO 9249	373.0 HP 278.0 kW	More Less
Engine Model	Cat C13 ACERT Cat C13 ACERT	More Less
Displacement	763.0 in³ 12.5 l	More Less
Maximum Power - 1,800 rpm - SAE J1995	412.0 HP 307.0 kW	More Less
Maximum Net Power - 1,800 rpm - ISO 9249	373.0 HP 278.0 kW	More Less
Maximum Net Power - 1,800 rpm - ISO 9249 - Metric	378.0 HP 278.0 kW	More Less
Maximum Net Power - 1,800 rpm - SAE J1349	373.0 HP 278.0 kW	More Less
Maximum Net Power - 1,800 rpm - SAE J1349 - Metric	378.0 HP 278.0 kW	More Less
Maximum Net Torque - 1,000 rpm	1505.0 lb/ft 2040.0 N·m	More Less
Maximum Power - 1,800 rpm - ISO 14396	406.0 HP 303.0 kW	More Less
Maximum Power - 1,800 rpm - ISO 14396 - Metric	412.0 HP 303.0 kW	More Less
Maximum Power - 1,800 rpm - SAE J1995 - Metric	417.0 HP 307.0 kW	More Less
Peak Gross Torque - 1,300 rpm - ISO 14396	1602.0 lb/ft 2172.0 N·m	More Less
Peak Gross Torque - 1,300 rpm - SAE J1995	1617.0 lb/ft 2192.0 N·m	More Less

Operating Weight	66337.0 lb 30090.0 kg	More Less
Note	Weight based on a machine configuration with Michelin 29.5R25 XLDD1 L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, open differential axles, secondary steering, sound suppression, and a 5.4 m3 (7 Weight based on a machine configuration with Michelin 29.5R25 XLDD1 L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, open differential axles, secondary steering, sound suppression, and a 5.4 m3 (7	More Less

Bucket Capacities

4.2-12.2 m? (5.25-16.0 yd?) 4.2-12.2 m? (5.25-16.0 yd?)

More Less

Breakout Force	50357.0 lbf 224.0 kN	More Less
Static Tipping Load - Full 40° Turn - No Tire Deflection	45847.0 lb 20796.0 kg	More Less
Static Tipping Load - Full 40° Turn - With Tire Deflection	43133.0 lb 19565.0 kg	More Less
Note (1)	For a machine configuration as defined under ?Weight.? For a machine configuration as defined under ?Weight.?	More Less
Note (2)	Full compliance to ISO 143971:2007 Sections 1 thru 6. Full compliance to ISO 143971:2007 Sections 1 thru 6.	More Less

Forward - 1	4.3 mile/h 6.9 km/h	More Less
Forward - 2	8.3 mile/h 13.3 km/h	More Less
Forward - 3	14.6 mile/h 23.5 km/h	More Less
Forward - 4	24.5 mile/h 39.5 km/h	More Less
Reverse - 1	4.8 mile/h 7.8 km/h	More Less
Reverse - 2	9.4 mile/h 15.2 km/h	More Less
Reverse - 3	16.7 mile/h 26.9 km/h	More Less
Reverse - 4	24.5 mile/h 39.5 km/h	More Less
Note	Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 933 mm (37 in) roll radius. Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 933 mm (37 in) roll radius.	More Less

Hydraulic Cycle Time - Total	10.1 s 10.1 s	More Less
Implement System - Maximum Operating Pressure	4975.0 psi 34300.0 kPa	More Less
Implement System - Maximum Pump Output at 2,250 rpm	119.0 gal/min 449.0 l/min	More Less

Cooling System	12.0 gal (US) 45.0 l	More Less
Crankcase	9.8 gal (US) 37.0 l	More Less
Differential - Final Drives - Front	22.0 gal (US) 84.0 l	More Less
Differential - Final Drives - Rear	22.0 gal (US) 84.0 l	More Less
Fuel Tank	112.5 gal (US) 426.0 l	More Less
Hydraulic Tank	40.0 gal (US) 153.0 l	More Less
Transmission	20.3 gal (US) 77.0 l	More Less

Note	*Distance of 15 m (49.2 ft), moving forward in second gear ratio. *Distance of 15 m (49.2 ft), moving forward in second gear ratio.	More Less
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)	112.0 dB(A) 112.0 dB(A)	More Less
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)	78 dB(A)* 78 dB(A)*	More Less
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)	75.0 dB(A) 75.0 dB(A)	More Less

Bucket Range

4.2-12.2 m? (5.25-16.0 yd?) 4.2-12.2 m? (5.25-16.0 yd?)

More Less

Centerline of Rear Axle to Edge of Counterweight	8.17 ft 2469.0 mm	More Less
Centerline of Rear Axle to Hitch	6.25 ft 1900.0 mm	More Less
Ground Clearance	1.42 ft 453.0 mm	More Less
Height - Top of Exhaust Pipe	12.33 ft 3746.0 mm	More Less
Height - Top of Hood	10.25 ft 3110.0 mm	More Less
Height - Top of ROPS	12.58 ft 3813.0 mm	More Less
Hinge Pin Height at Carry	2.25 ft 678.0 mm	More Less
Hinge Pin Height at Maximum Lift	15.58 ft 4760.0 mm	More Less
Lift Arm Clearance at Maximum Lift	13.08 ft 4010.0 mm	More Less
Maximum Width over Tires	10.83 ft 3296.0 mm	More Less
Note	All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires. All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires.	More Less
Overall Length - Without Bucket	26.83 ft 8164.0 mm	More Less
Rack Back - Carry Height	48 degrees 48 degrees	More Less
Rack Back - Maximum Lift	61 degrees 61 degrees	More Less
Rack Back at Ground	39 degrees 39 degrees	More Less
Tread Width	8.0 ft 2440.0 mm	More Less
Wheel Base	12.5 ft 3800.0 mm	More Less

Centerline of Rear Axle to Edge of Counterweight	8.17 ft 2469.0 mm	More Less
Centerline of Rear Axle to Hitch	6.25 ft 1900.0 mm	More Less
Ground Clearance	1.42 ft 453.0 mm	More Less
Height - Top of Exhaust Pipe	12.33 ft 3746.0 mm	More Less
Height - Top of Hood	10.25 ft 3110.0 mm	More Less
Height - Top of ROPS	12.58 ft 3813.0 mm	More Less
Hinge Pin Height at Carry	2.08 ft 621.0 mm	More Less
Hinge Pin Height at Maximum Lift	14.83 ft 4539.0 mm	More Less
Lift Arm Clearance at Maximum Lift	12.42 ft 3795.0 mm	More Less
Maximum Width over Tires	10.83 ft 3296.0 mm	More Less
Note	All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires. All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires.	More Less
Overall Length - Without Bucket	26.17 ft 7964.0 mm	More Less
Rack Back - Carry Height	48 degrees 48 degrees	More Less
Rack Back - Maximum Lift	61 degrees 61 degrees	More Less
Rack Back at Ground	40 degrees 40 degrees	More Less
Tread Width	8.0 ft 2440.0 mm	More Less
Wheel Base	12.5 ft 3800.0 mm	More Less