| Dipper Payload | 82.0 t |
|---|---|
| Dipper Capacity | 27.5-60.4 m3 (36-79 yd3) |
| Working Weight - With Dipper and Standard Links | 1295777.0 kg |
| Working Weight - With Dipper and Standard Links | 2856700.0 lb 1295777.0 kg | More |
| Ballast - Furnished By Customer | 574000.0 lb 260362.0 kg | More |
| Note (1) | These weights will vary slightly depending upon dipper and optional equipment selection. These weights will vary slightly depending upon dipper and optional equipment selection. | More |
| Note (2) | All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads. All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads. | More |
| Crawler Dimensions - Overall Width 213.4 cm (84 in) Treads, Standard | 32.75 ft 10.0 m | More |
| Crawler Dimensions - Overall Width 274.3 cm (108 in) Treads | 34.75 ft 10.6 m | More |
| Ground Bearing Pressure | Ground bearing pressure is dependent upon many factors. Ground bearing pressure is dependent upon many factors. | More |
| Ground Bearing Pressure - 213.4 cm (84 in) Treads - Standard | 58.0 psi 400.0 kPa | More |
| Ground Bearing Pressure - 274.3 cm (108 in) Treads | 46.0 psi 316.0 kPa | More |
| Ground Bearing Pressure - Total Effective Bearing Area (1) | 343.0 ft² 32.0 m² | More |
| Ground Bearing Pressure - Total Effective Bearing Area (2) | 442.0 ft² 41.0 m² | More |
| Hoist | A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear. A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear. | More |
| Planetary Propel | Dual-motor independent drive. Dual-motor independent drive. | More |
| Swing | Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack. Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack. | More |
| Upper Works Overall Width - Including Standard Walkways | 44.25 ft 13.5 m | More |
| Cutting Height - Maximum | 48.75 ft 14.9 m | More |
| Cutting Radius - Maximum | 74.75 ft 22.8 m | More |
| Dumping Height - With Clearance to Open Dipper Door | 30.84 ft 9.4 m | More |
| Note (1) | Optimal working ranges based on loading a Cat® 793F truck. Optimal working ranges based on loading a Cat® 793F truck. | More |
| Note (2) | *All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads. *All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads. | More |
| Radius of Level Floor | 52.49 ft 16.0 m | More |
| Revolving Frame Tail Swing Radius | 30.51 ft 9.3 m | More |
| Components (1) | 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room. 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room. | More |
| Type | Automatic, single-line system for open gear lubricant and grease. Automatic, single-line system for open gear lubricant and grease. | More |
| Components (2) | External fastfill from lower level. External fastfill from lower level. | More |
| Drive | IGBT Acutrol drive system. IGBT Acutrol drive system. | More |
| Note | Other voltage options available to suit customer requirements. Other voltage options available to suit customer requirements. | More |
| Power Requirements - 50 Hz | 6,000V, 6,600V, 7,200V, 11,000V 6,000V, 6,600V, 7,200V, 11,000V | More |
| Power Requirements - 60 Hz | 7,200V 7,200V | More |
| Power Requirements - Average Power Demand | 832-1165 kW (1,116-1,562 hp) 832-1165 kW (1,116-1,562 hp) | More |
| Power Requirements - Peak power | 4466.0 HP 3330.0 kW | More |
| Power Requirements - Voltage | 3 phase, 50/60 Hz, 7,200V 3 phase, 50/60 Hz, 7,200V | More |
| Components | One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. | More |
| Crowd | Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. | More |
| Rope Data - Boom Suspension - Diameter | 3.25 in 83.0 mm | More |
| Rope Data - Boom Suspension - No. | 4 4 | More |
| Rope Data - Crowd - Diameter | 2.5 in 64.0 mm | More |
| Rope Data - Crowd - No. | 1 1 | More |
| Rope Data - Dipper Trip - Diameter | 0.625 in 16.0 mm | More |
| Rope Data - Dipper Trip - No. | 1 1 | More |
| Rope Data - Hoist - Diameter | 2.75 in 70.0 mm | More |
| Rope Data - Hoist - No. | 2 2 | More |
| Rope Data - Note | High impact ropes available as an option. High impact ropes available as an option. | More |
| Rope Data - Retract - Diameter | 2.5 in 64.0 mm | More |
| Rope Data - Retract - No. | 1 1 | More |
Name : Cat
Service Tel : （309）578-6298
E-mail :
Web Site : https://www.caterpillar.com/en.html
Address :
Copyright Notice 2002-2024 global-ce.com Construction Machinery Online. All rights reserved.
Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China
