| Dipper Payload | 45.0 t |
|---|---|
| Dipper Capacity | 19.1-38.2 m3 (25-50 yd3) |
| Working Weight - With Dipper and Standard Links | 793259.0 kg |
| Working Weight - With Dipper and Standard Links | 1748837.0 lb 793259.0 kg | More |
| Ballast - Furnished By Customer | 352000.0 lb 159665.0 kg | More |
| Note (1) | These weights will vary slightly depending upon dipper and optional equipment selection. These weights will vary slightly depending upon dipper and optional equipment selection. | More |
| Note (2) | All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads. All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads. | More |
| Crawler Dimensions - Overall Width 182.9 cm (72 in) Treads, Standard | 28.22 in 8.6 cm | More |
| Ground Bearing Pressure | Ground bearing pressure is dependent upon many factors. Ground bearing pressure is dependent upon many factors. | More |
| Ground Bearing Pressure - 182.9 cm (72 in) Treads | 39.0 in 269.0 cm | More |
| Ground Bearing Pressure - Total Effective Bearing Area | 315.6 ft² 29.3 m² | More |
| Hoist | A motor coupled to two gear reductions drives a 137 cm (54 in) hoist drum. A motor coupled to two gear reductions drives a 137 cm (54 in) hoist drum. | More |
| Planetary Propel | Dual-motor independent drive. Dual-motor independent drive. | More |
| Swing | Parallel shaft gear cases, driven by a vertically mounted motor, are located on either side of the revolving frame. Parallel shaft gear cases, driven by a vertically mounted motor, are located on either side of the revolving frame. | More |
| Upper Works Overall Width - Including Standard Walkways | 41.33 in 12.6 cm | More |
| Cutting Height - Maximum | 45.0 ft 13.7 m | More |
| Cutting Radius - Maximum | 67.59 ft 20.6 m | More |
| Dumping Height - With Clearance to Open Dipper Door | 27.56 ft 8.4 m | More |
| Note (1) | Optimal working ranges based on loading a Cat® 785D truck. Optimal working ranges based on loading a Cat® 785D truck. | More |
| Note (2) | *All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads. *All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads. | More |
| Radius of Level Floor | 48.88 ft 14.9 m | More |
| Revolving Frame Tail Swing Radius | 25.59 in 7.8 m | More |
| Components (1) | 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room. 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room. | More |
| Type | Automatic, single-line system for open gear lubricant and grease. Automatic, single-line system for open gear lubricant and grease. | More |
| Components (2) | External fast fill from lower level. External fast fill from lower level. | More |
| Drive | IGBT Acutrol drive system. IGBT Acutrol drive system. | More |
| Note | Other voltages available to suit customer requirements. Other voltages available to suit customer requirements. | More |
| Power Requirements - 50 Hz | 6,000V, 6,600V, 7,200V 6,000V, 6,600V, 7,200V | More |
| Power Requirements - 60 Hz | 4,160V, 7,200V 4,160V, 7,200V | More |
| Power Requirements - Average Power Demand | 538-753 kW (721-1,010 hp) 538-753 kW (721-1,010 hp) | More |
| Power Requirements - Peak power | 2886.0 mm H2O 2152.0 kg/mm | More |
| Power Requirements - Voltage | 3 phase, 50/60 Hz, 7,200V 3 phase, 50/60 Hz, 7,200V | More |
| Components | One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. | More |
| Crowd | Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. | More |
| Note | High impact ropes available as an option High impact ropes available as an option | More |
| Standard Rope Data - Boom Suspension - Diameter | 2.75 in 70.0 mm | More |
| Standard Rope Data - Boom Suspension - No. | 4 4 | More |
| Standard Rope Data - Crowd - Diameter | 2.25 in 57.0 cm | More |
| Standard Rope Data - Crowd - No. | 1 1 | More |
| Standard Rope Data - Dipper Trip - Diameter | 0.625 in 16.0 mm | More |
| Standard Rope Data - Dipper Trip - No. | 1 1 | More |
| Standard Rope Data - Hoist - Diameter | 2.375 in 60.0 mm | More |
| Standard Rope Data - Hoist - No. | 2 2 | More |
| Standard Rope Data - Retract - Diameter | 2.25 in 57.0 mm | More |
| Standard Rope Data - Retract - No. | 1 1 | More |
Name : Cat
Service Tel : （309）578-6298
E-mail :
Web Site : https://www.caterpillar.com/en.html
Address :
Copyright Notice 2002-2024 global-ce.com Construction Machinery Online. All rights reserved.
Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China
