Cat Electric Rope Shovels 7295

Cat Electric Rope Shovels 7295

Dipper Payload 45.0 t
Dipper Capacity 19.1-38.2 m3 (25-50 yd3)
Working Weight - With Dipper and Standard Links 793259.0 kg
Send Inquiry

Overview

Dimensions

Units:
Dipper Payload 50.0 Sh Ton 45.0 t Less
Dipper Capacity 19.1-38.2 m3 (25-50 yd3) 19.1-38.2 m3 (25-50 yd3) Less
Note Dependent on application and material density. Dependent on application and material density. Less

Weights

Working Weight - With Dipper and Standard Links 1748837.0 lb 793259.0 kg Less
Ballast - Furnished By Customer 352000.0 lb 159665.0 kg Less
Note (1) These weights will vary slightly depending upon dipper and optional equipment selection. These weights will vary slightly depending upon dipper and optional equipment selection. Less
Note (2) All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads. All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads. Less

Main Structures

Crawler Dimensions - Overall Width 182.9 cm (72 in) Treads, Standard 28.22 in 8.6 cm Less
Ground Bearing Pressure Ground bearing pressure is dependent upon many factors. Ground bearing pressure is dependent upon many factors. Less
Ground Bearing Pressure - 182.9 cm (72 in) Treads 39.0 in 269.0 cm Less
Ground Bearing Pressure - Total Effective Bearing Area 315.6 ft² 29.3 m² Less
Hoist A motor coupled to two gear reductions drives a 137 cm (54 in) hoist drum. A motor coupled to two gear reductions drives a 137 cm (54 in) hoist drum. Less
Planetary Propel Dual-motor independent drive. Dual-motor independent drive. Less
Swing Parallel shaft gear cases, driven by a vertically mounted motor, are located on either side of the revolving frame. Parallel shaft gear cases, driven by a vertically mounted motor, are located on either side of the revolving frame. Less
Upper Works Overall Width - Including Standard Walkways 41.33 in 12.6 cm Less

Optimal Working Ranges*

Cutting Height - Maximum 45.0 ft 13.7 m Less
Cutting Radius - Maximum 67.59 ft 20.6 m Less
Dumping Height - With Clearance to Open Dipper Door 27.56 ft 8.4 m Less
Note (1) Optimal working ranges based on loading a Cat® 785D truck. Optimal working ranges based on loading a Cat® 785D truck. Less
Note (2) *All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads. *All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads. Less
Radius of Level Floor 48.88 ft 14.9 m Less
Revolving Frame Tail Swing Radius 25.59 in 7.8 m Less

Lube System

Components (1) 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room. 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room. Less
Type Automatic, single-line system for open gear lubricant and grease. Automatic, single-line system for open gear lubricant and grease. Less
Components (2) External fast fill from lower level. External fast fill from lower level. Less

Electrical

Drive IGBT Acutrol drive system. IGBT Acutrol drive system. Less
Note Other voltages available to suit customer requirements. Other voltages available to suit customer requirements. Less
Power Requirements - 50 Hz 6,000V, 6,600V, 7,200V 6,000V, 6,600V, 7,200V Less
Power Requirements - 60 Hz 4,160V, 7,200V 4,160V, 7,200V Less
Power Requirements - Average Power Demand 538-753 kW (721-1,010 hp) 538-753 kW (721-1,010 hp) Less
Power Requirements - Peak power 2886.0 mm H2O 2152.0 kg/mm Less
Power Requirements - Voltage 3 phase, 50/60 Hz, 7,200V 3 phase, 50/60 Hz, 7,200V Less

Front End

Components One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. Less
Crowd Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. Less
Note High impact ropes available as an option High impact ropes available as an option Less
Standard Rope Data - Boom Suspension - Diameter 2.75 in 70.0 mm Less
Standard Rope Data - Boom Suspension - No. 4 4 Less
Standard Rope Data - Crowd - Diameter 2.25 in 57.0 cm Less
Standard Rope Data - Crowd - No. 1 1 Less
Standard Rope Data - Dipper Trip - Diameter 0.625 in 16.0 mm Less
Standard Rope Data - Dipper Trip - No. 1 1 Less
Standard Rope Data - Hoist - Diameter 2.375 in 60.0 mm Less
Standard Rope Data - Hoist - No. 2 2 Less
Standard Rope Data - Retract - Diameter 2.25 in 57.0 mm Less
Standard Rope Data - Retract - No. 1 1 Less

Send Inquiry

*Subject:
*Purchase Time:
*Content:
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number: - -
 

Construction Machinery Online

Language Options

E-Mail: alina@global-ce.com TEL: 0086-10-84673349,18701576687
lmjx.net Site: International - China - U.S.A - Russia - France - Spain - Portugal - India - Germany - Saudi Arabia - Indonesia

Copyright Notice 2002-2024 global-ce.com Construction Machinery Online. All rights reserved.

Address: Room 901, Building C, Ruipu Mansion, Hongjunying South Road No.15, Chaoyang District, Beijing.100107 P.R.China